How many square feet in a square metre?
1 m² = 10.7639 ft². Multiply square metres by ~10.76 to get square feet.
Convert area units or enter plot length × width for Marla, Kanal, ft², and m². Presets, size comparisons, history, and share links—nothing uploaded.
Loading area converter…
An area converter converts m², ft², acres, Marla, Kanal, and 25 plot units—or calculates area from length × width—with presets, history, share links, and size comparisons.
Enter a value in any area unit and see equivalent amounts in every supported unit at once. The tool converts through square metres as the base unit, using internationally accepted factors (for example 1 acre = 4,046.86 m² and 1 ft² = 0.092903 m²).
Use it for real estate listings (m² vs ft²), farmland (acres vs hectares), floor plans, and land surveys. It converts two-dimensional area only—not length, volume, or pressure (use Length Converter or Volume Converter for those).
All calculations run locally in your browser; values you enter are not uploaded to EverydayTools servers.
Area conversions pass through square metres: target = (value × fromFactor) ÷ toFactor.
Concise answers for common searches — definitions, steps, and comparisons.
1 m² = 10.7639 ft². Multiply square metres by ~10.76 to get square feet.
Yes. Conversions run locally in your browser; values are not uploaded to EverydayTools servers.
Each unit is stored as a factor relative to the square metre. Converting multiplies your input by the source factor to reach m², then divides by the destination factor.
Formula
result = value × (fromUnitFactor ÷ toUnitFactor)Type a number in the From column and select the unit (e.g. 100 Square Meter or 2.5 Acre).
Click a unit in the To column to highlight the primary result. All other units show equivalent values simultaneously.
Use Swap Units to reverse direction, or Copy Result for listings, spreadsheets, or notes.
Switch to Plot size mode, enter length and width (ft, m, or yd), and read area in Marla, Kanal, ft², or m².
Input
85 Square MeterOutput
914.93 Square Foot · 0.0085 HectareEuropean listings use m²; US listings use ft². 85 m² ≈ 915 ft² for price-per-unit comparisons.
Input
100 AcreOutput
40.47 Hectare · 0.4047 Square KilometerUS agriculture often uses acres; EU and international records use hectares. 100 acres ≈ 40.47 ha.
Input
Plot 30 ft × 40 ftOutput
1,200 ft² · 4.41 Marla (PK) · 111.48 m²A common residential plot size in South Asia—1,200 ft² equals about 4.4 standard Pakistan Marla.
Common real-world scenarios where this tool saves time.
Real estate
Convert property sizes when comparing international listings or migrating listing data between markets.
Agriculture & land
Translate US acreage to hectares for international reports, subsidies, or trade data.
Construction & design
Convert blueprint areas between metric and imperial units for material takeoffs and specs.
Step-by-step chains that connect related tools for common tasks.
Measure length first, then area, then volume when sizing rooms or containers.
Use the right EverydayTools converter for your measurement type.
| Tool | Converts | Example units |
|---|---|---|
| Area Converter | Flat surface area | m², ft², acres, hectares |
| Length Converter | Distance / perimeter | m, ft, in, miles, km |
| Volume Converter | Three-dimensional space | L, m³, gal, ft³ |
| Pressure Converter | Force per area | Pa, psi, bar (not area alone) |
Area is two-dimensional (ft²). For wall length or perimeter, use Length Converter instead.
This tool converts flat area only. For cubic metres or gallons, use Volume Converter.
Advertisement
1 square metre = 10.7639 square feet. The reverse: 1 square foot = 0.092903 m². Quick estimate: multiply m² by ~10.76 to get ft².
1 hectare = 2.47105 acres. 1 acre = 0.404686 hectares. Memory aid: 1 ha ≈ 2.47 acres.
1 acre = 43,560 square feet = 4,046.86 square metres. Roughly the size of a US football field without end zones.
1 hectare = 10,000 square metres (100 m × 100 m). 1 km² = 100 hectares.
Standard Pakistan Marla = 272.25 ft². 1 Kanal = 20 Marla = 5,445 ft². Sizes can vary by locality—verify for legal transactions.
Separate entries for Uttar Pradesh (~27,000 ft²) and West Bengal (~14,400 ft²) Bigha. Other states may differ—check the unit note in the converter.
Yes—use Plot size mode. Enter length and width in feet, metres, or yards; the tool calculates area in ft², m², Marla, Kanal, or any supported unit.
No. All conversion math runs in your browser; inputs are not uploaded to EverydayTools servers.
Area values you enter stay in the browser for conversion math only.
Standard m²-based factors; official land surveys may use jurisdiction-specific rounding.
For planning and listings—not legal survey, tax, or cadastral certification.
Advertisement
Reviewed by EverydayTools Editorial Team on 2026-06-02.
Conversion result
92.903 m²
1,000 ft² → Square Meter
Also: 0.023 ac · 0.0093 ha · 3.6731 marla · 0.1837 kanal
1 ft² = 0.0929 m²
Regional plot units use common regional definitions—verify against local land records for legal transactions. Bigha sizes vary by state; see unit notes in the dropdown.